Skip to content
  • There are no suggestions because the search field is empty.

How to Connect a Dimlux Xtreme Lamp to a TrolMaster System

This article explains how to connect a Dimlux Extreme Series lamp to a TrolMaster system.

Connecting the Dimlux Xtreme Series Lamp to TrolMaster

To successfully connect your Dimlux Xtreme Series lamp to a TrolMaster system, follow these steps:

  1. Power the Lamp:

    • Connect your Dimlux Xtreme Series lamp to its power supply.
    • Do not connect the dimming cable at this stage.

  2. Select Spectrum:

    • Use the lamp’s interface to manually choose your desired spectrum mode.

  3. Connect Dimmer:

    • After setting the spectrum, attach the TrolMaster LMA-12 dimming cable between your lamp and the TrolMaster controller.

  4. Adjust Intensity:

    • Once connected, you can adjust the LED’s intensity via the TrolMaster system within the 50–100% range. Note that going below 50% will turn the lamp off.

Changing the Spectrum

If you wish to change the spectrum after initial setup:

  1. Unplug the LMA-12 dimming cable and disconnect the lamp power.
  2. Power the lamp back on and select the new spectrum.
  3. Reconnect the dimming cable.
Conclusion

Connecting your Dimlux Xxtreme Series lamp to a TrolMaster system involves powering the lamp, selecting the spectrum, connecting the dimming cable, and adjusting the intensity. For any spectrum changes, ensure to follow the outlined steps for proper setup.