Skip to content
  • There are no suggestions because the search field is empty.

Hard-Reset/ Blackscreen Aqua-X Plus (NFS-3)

If you need to perform a hard reset in the event of a black screen, you must carry out the following steps:

  1. prepare a micro SD card with less than 32 GB in FAT32 format (Here you will find examples of compatible SD cards and USB sticks) and create a PowerUp file. Here you will find the instruction for creating a PowerUP file, Link
  2. remove all cables from the controller
  3. insert the SD card
  4. plug in the power cable of the controller
  5. now the controller starts and it is possible to start the update from the SD card if you follow the instructions on the controller
  6. Once the progress bar is full and the controller restarts, be sure to remove the SD card, otherwise the update will be performed again

 

Attention: A hard reset will delete all settings and data.