.svg){kind=logo}
FAQ + Troubleshooting
Frequently Asked Questions, Troubleshooting
Calibration
Setpoints
Firmware
FAQ
- How do I update the firmware for my Controller (TCS-1, HCS-1, NFS-1, CDA-1)?
- Which power cord is included with the LLT-2 in the US?
- Troubleshooting Touchscreen Issues on Hydro-X Pro Units
- Understanding Crop Steering Capabilities of the NFS-3 Irrigation System
- Examples of Compatible SD Cards and USB Sticks
- How do I register my unit on the mobile app?
- What product warranty do I receive when I purchase TrolMaster products?
- What is the proper humidity, temperature, CO2 or light level?
- How do I know if my mini-split Air Conditioner will be compatible with the ARS-1?
- Why is it that some Air Conditioner units does not work with the controller?
- Which LMA adapter should I use for my lights?
- Where should I hang my sensors?
- How does the controllers communicate with all the devices and sensors?
- What is Deadband?
- What is Hot Start Delay?
- Can I connect my controller wirelessly to the Internet?
- What does the "interlock" function do on the DCC-1?
- What does the override option do?
- What is the DSD-1 dry contact module and how does the it work?
- Does it matter if I use 230V electronics on the 120V device stations?
- Is there a way how I can prevent pin corrosion for my cables/Y-splitters?
- I have single phase fans, can I use the Delta-1 to control them?
- My fans are 3-phase, but I only have single phase power in the building, can I still use a VFD to control my 3-phase fans?
- How many sensors can I use with my Carbon-X (CDA-1) controller?
- How many AMP-3 can be used on each controller?
- How do I make my own RJ12 cable?
- Will I lose all of my data in case of a power outage?
- What controller is the AMP-2 used with?
- Which controller is the AMP-3 used with?
- What pump/solenoid voltage is supported?
- What is the 4RS-1E expander station and how does it work?
- What is Temperature Deadband?
- What is Humidity Deadband?
- What is CO2 Deadband?
- What is Fuzzy Logic?
- How do I update the firmware of my ARS-1?
- How do I update the controller/thermostat/humidistat? Do I need to update?
- How can I get a TrolMaster account?
- Can I check/control my room from my phone?
- What can I do if my lights are not compatible with any of the LMA lighting adapters?
- How many DCC-1(s) can I connect to my controller?
Troubleshooting
- Why are some feature(s) on my controller/modules are missing.
- How to create a PowerUP update for HCS-2, HCS-3, NFS-2 and NFS-3.
- The sensor(s) is not connecting to the controller correctly, only dashes are shown on the controller main screen.
- I tried to scan the QR code on my controller but it said "unavailable device number"?
- The ARS-1 remote station doesn't seem to work properly with my Air Conditioning (AC).
- How do I check the firmware of my ARS-1?
- When I connect a DS socket module, my lights turn off.
- There are no connections between the modules/devices and the controller, even though I have plugged them in.
- When I try to address my controller to a DSD, does the DSD flash between DSD and DST or DSC?
- What is the OCP message on the Beta-2/Beta-4/Beta-8?
- The message STUS is displayed on the Beta-8 controller.