Hard-Reset/ Blackscreen Aqua-X (NFS-1)

If you need to perform a hard reset in the event of a black screen, you must carry out the following steps:

1. prepare a micro SD card with less than 32 GB in FAT32 format (Here you will find examples of compatible SD cards and USB sticks) and the latest firmware, Link
2. remove all cables from the controller
3. insert the SD card
4. press and hold the left arrow and plug in the power cable of the controller
5. now the controller starts and it is possible to start the update from the SD card by presing enter and/or if you follow the instructions on the controller

 

Attention: A hard reset will delete all settings and data.