Skip to content
Contact us
  • There are no suggestions because the search field is empty.

Mounting Options for the MBS-PAR Sensor: Installation Guide

Summary: This article provides information on mounting options for the MBS-PAR sensor, including available holders and installation methods. Link to the manual

What mounting options are available for the MBS-PAR sensor?

The MBS-PAR sensor ships without a dedicated large or long mounting holder, but its hardware is engineered to provide flexible, secure installation options in any grow environment:

  1. Clamp Feature: The MBS-PAR sensor includes a clamp that can be used with tubes, providing a versatile mounting solution.

  2. Threaded Openings: The sensor has two threaded openings located at the bottom, which facilitate mounting with various hardware.

  3. Recommended Mounting Method: A practical approach for mounting the MBS-PAR sensor is to use an ITEM profile (a standardized aluminum extrusion profile, also known as a T-slot profile) along with a small metal plate or angle bracket. Attach the metal plate or angle to the ITEM profile, then secure the sensor to the plate using the threaded openings at the bottom of the sensor. This setup allows for secure installation underneath lights.

Conclusion

While there is no specific holder available for the MBS-PAR sensor, its design allows for effective mounting using clamps and threaded openings. Utilizing an ITEM profile with additional hardware can help achieve a stable installation under lighting setups.